SignalTEK 10G Series
• Application
Optical Fiber & Network,Automobile Industries,Automation,
• description
Determine max bandwidth up to 10 Gb/s,Verify Multi-Gig upgrades on existing cabling,Pass/Fail to 1/2.5/5/10Gb IEEE standards,Eliminate PoE guesswork up to 90W,Copper and fibre interfaces up to 10Gb TREND AnyWARE Cloud and PDF reporting,The new SignalTEK 10G measures the maximum bandwidth of the network cabling up to 10 Gigabits per second. By simulating actual network traffic users can test, troubleshoot and document network and data cable performance up to 10 Gigabit Ethernet standards,SignalTEK 10G has built-in Wi-Fi connectivity to connect seamlessly to the free AnyWARE Cloud test management system. AnyWARE Cloud offers pre-configuration to eliminate errors on-site, label printer connectivity to save time and “proof of performance” PDF reports for the clients.
• Feature
1).Complete Connectivity Wi-Fi connectivity to the AnyWARE Cloud management system. USB connection for transferring test data
2).Built-in PDF Reporting Reports can be generated directly from the SignalTEK 10G as well as the Cloud
3). Partner Finder Provides audible tone and visible indicator when connected to the remote unit
4). Intuitive User Interface Simplified user interface for easy setup and operation
5). Touchscreen High resolution impact resistant touchscreen for ease of use
6).Internal Load speaker Audible tones assist the user when testing
7). Rugged Design Rubberised housing, protected screen and protected measurement port
8).Label Printer Connectivity Easily send label IDs to printers for fast and accurate labelling.
SignalTEK CT/NT
• Application
Optical Fiber & Network,Automobile Industries,Automation,
• description
SignalTEK CT proves the performance of your data cables in seconds with a IEEE Gigabit performance test and advanced wiremapping. Effortlessly document your test results,Now includes touchscreen,Advanced wiremapping with TDR fault location,Gigabit performance test to the IEEE802.3ab Ethernet standard,Automatic generation of PDF reports,Report upload to USB memory stick without a PC,The SignalTEK CT issues a PDF report to prove that your installed data cables can carry Gigabit Ethernet traffic at full speed with no errors, and confirms correct wiremap results,Easy to use – Autotest provides proof of cable performance in seconds,TREND AnyWARE app – Send PDF reports from anywhere. Click here for details,Real world testing – Gigabit Ethernet is transmitted bi-directionally,Low cost of ownership – No calibration required and includes field replaceable RJ45 contacts.
• description
Network Performance Test • Port speed 10/100/1000
• PoE/PoE+ detection
• Web data performance
• IP video performance
• IP CCTV performance
• VoIP performance
Cable Performance Test
• TDR wiremap
• IEEE 802.3ab Gigabit data
• Custom wiremap for nonEthernet cabling such as Profinet
Network diagnostics & troubleshooting
• Network speed 10/100/1000
• Network IP/DHCP configuration
• CDP/LLDP port identification
• PoE/PoE+ detection/load test
• Ping/trace route
• Blink switch link LED
NaviTEK NT
• Application
Optical Fiber & Network,Automobile Industries,Automation,
• description
Now includes a touchscreen,Network troubleshooter (copper/fibre),PoE, service detection and port information,Real time display of network traffic,Test storage and PDF reporting,Cable tracing/distance to fault (TDR),Supports TREND AnyWARE App,he new NaviTEK NT is a network cable tester for troubleshooting and maintenance of active and passive copper and fibre networks. Incorporating an improved graphical interface NaviTEK NT allows network technicians to pinpoint and solve network connectivity issues faster than ever before. Subsequently, tests can be saved as pdf reports and shared with colleagues and clients using the free TREND AnyWare™ app,Network troubleshooting – pinpoint and solve network connectivity issues quickly,Network service detection – port info, IP/MAC addresses and operates on VLAN,Monitor network traffic – real time display of broadcast network traffic Copper and fibre cable tests – wiremap, distance to fault, PoE, optical power indication,Professional PDF reports – send them from the site using the free TREND AnyWARE app
• Feature
Network traffic performance test on copper and fiber to IEEE802.3ab standard
• Wiremap test for open, shorts, miswires and split pairs to TIA-568 standard
• Gigabit link verification for copper and fiber cabling
• PoE/PoE+ verification that displays available voltage at device location
• Verify network configuration (device IP/ gateway address/subnet mask)
• Switch port identification via LLDP/ CDP protocols Distance to fault using TDR technology (copper only)
• Ability to identify and trace cables with a compatible amplifier probe (R180001)
• Optical power indication (with compatible SFP modules)
• Stress test network before installing bandwidth hungry devices
• Port blink to visually trace cable from work area outlet to network switch
• Displays port ID of LLDP/CDP enabled switches to eliminate manual cable tracing
LanXPLORER Pro
• Application
Optical Fiber & Network,Automobile Industries,Automation,
• description
In-line network tester LanXPLORER Pro tool is for analysing and diagnosing problems in networks, cabling and Ethernet devices using copper, fibre and Wi-Fi interfaces,Now includes a 5GHz band Wi-Fi antenna Monitor total network bandwidth throughput,Voice over IP (VoIP) QoS testing,Identifies source of network conflicts (copper),Identify MAC and IP address devices on network,LanXPLORER Pro is a tester for analysing and diagnosing problems in networks, cabling and Ethernet devices using copper, fibre and Wi-Fi interfaces,PoE/PoE+ load tests to determine the maximum power available ,PoE/PoE+ monitor that shows the voltage and current used at the device,Optical power indication to test your fibre optic cabling,VLAN automatic detection of VLAN ID,Wi-Fi monitor – signal strength (dBm) and Signal to Noise ratio (SNR),Wiremap testing for open, shorts, miswires and split pairs,Distance to fault for copper data cabling,VoIP monitor – measure QoS in real time using the in-line mode,Network congestion – identify the top 10 talkers and listeners,Traffic stats – monitor Min/Max/AVG throughput in MB/s,NETMAP – list all IP and MAC addresses on the network,Network Discovery – display crucial network information using LLDP/CDP/EDP
UniPRO MGig 1/SEL 1
• Application
Optical Fiber & Network,Automobile Industries,Automation,
• description
Ethernet transmission tester for carrier and enterprise networks,Comprehensive in-line network monitoring,Simplified set-up of target devices, services and tests,RFC2544, BERT, SLA-Tick and Y.1564 (NetSAM),Simultaneous testing of multiple services,QoS tests – multiple VLAN (QinQ), MPLS, ToS and DSCP,Designed for comprehensive turn-up testing, monitoring and troubleshooting of fixed line, mobile, microwave and wireless carrier Ethernet links. UniPRO MGig1 is suitable for use on any backhaul link at speeds of up to 1 Gb/s,UniPRO MGig1 allows enterprise users to monitor the actual bandwidth and performance compared to the agreed service levels from the service provider. It can also be used to stress test and monitor the performance of LAN backbone links,Telco, cable TV, broadband, metro Ethernet WAN and leased line service providers Mobile network operators Data centres,Managers of public utility, industrial, transportation, health care, education and financial networks,LAN installation and maintenance personnel,System integrators
